Products Products
Hot Products / Hot Products More
2017 - 12 - 19
Application:Ultrasonic Vascular Doppler Detector is mainly used to detect the blood flow status of human or animal artery. It is suitable for Urology, male, hand surgery, Department of orthopedics, trauma surgery, vascular surgery, burns, plastic surgery, cardiothoracic surgery and so on with ultra high sensitivity, small size and easy-to-use characteristics. Feature:●10.0MHz±20% blood flow probe was used to detect the blood flow of human arterial venous blood;●2.4 inches TFT display can display the blood flow waveform, the average blood flow velocity;●Built-in data interface, the ho...
2017 - 12 - 19
Full-automatic PAD testing VASCULAR DOPPLER Feature:Obtains two pressures at each ankle site (PVR and DOPPLER)  Automated segmental studies to customize the item  Automatic ABI, TBI and segmental calculation  Performs the Seated ABI on mobility impaired patients  Bi-Directional Doppler probe PVR waveform modality & PPG probe to obtain toe and limb pressures Parameter:Ankle-brachial index(ABI),Toe-brachial Index ,segment exams, automatics calculation of the indicesControl mode: automatic cuff inflation/deflation and hand-held controllerWave mode: Bi-directional D...
2017 - 12 - 19
Application:It is mainly used for rapid and accurate diagnosis and diagnosis of non interventional peripheral vascular disease (PAD) in human body. By measuring the doppler ultrasound technique for ABI and TBI parameters to improve the doctor's detection rate of the diagnosis of peripheral vascular disease, it can quantitatively determine the detection rate of the diagnosis of peripheral vascular disease, and can quantitatively determine the severe degree of patients' peripheral vascular disease;It is suitable for geriatric department, cardiovascular department, Department of Endocrino...
Contact us
Mobile cloud website
Hotline:0755-264 16184
Fax:0755-264 16184
Address:Nanshan District, Shenzhen, South Road South Oil Industry Zone 210, 4th floor


上市Date: 2017-12-19


Product Category: Fetal Doppler
  • Describe
  • 产品功能
  • 产品参数


l  5.7 inches TFT LCD displays 2 x US and 1x UC data, mother's NIBP, TEMP, RR, SpO2, and ECG main parameters and monitoring trace curve etc.;

l  FHR collects signal indication, alarm indication for abnormal FHR, fetal movement indication, and can freeze monitoring status;

l  Can set the time limit (0-99 minutes), and automatically enter dormant state if no signal input;

l  Store monitoring data for 24 hours, with replay function;

l  Coding keyboard adjusts all parameters setting of the unit, convenient to use;

l  Adopt 832 thermal linear array printer, store the data and print rapidly; and printing width is 112mm;

l  The printer parameters can be adjusted as users’ need, including printing paper speed, trace line thickness, signal sampling rate, upper and lower alarming limit, real time, and date;

l  Set-up data and parameters can be automatically saved after power off;

l  The monitoring data can be conveyed to exterior computer through RS-232 or USB port;

l  Trolley (adjustable) for option, convenient to move and operate.


l  US

Transducer   9 crystals, wide wave beam

Working mode: Pulsed ultrasound Doppler

Ultrasonic frequency: 1.0MHz±10%

Measuring range:    50-240 BPM

Alarm range:  Up: 55-240 BPM Adjustable continuously within range

Low: 50-235BPM Adjustable continuously within range


Display range: 0-100units  (non-linear error: ≤±10%)


Edition USB 1.1 or USB 2.0; RS-232


Paper width: 112 ± 2mm effective record width: 105 ± 2mm; Paper length: 15m

Recorder density:  US:  27 BPM/ CM; UC:  40 BPM / CM

Printing speed (adjustable):  1 cm/min, 2 cm/min, 3 cm/min


Battery: 16.8V Ni-MH rechargeable batteries group;  AC 220 /110 V ;  Consume power: 60 W

Continuous working time in static condition: 1 hours

l  ECG and HR

Measuring range: 30 BPM -350 BPM

Cardiac electric noise level: 30 μV

Cardiac electric frequency response:

Filtering mode: 1-25 MHz

Non-filtering mode: 0.05-100 MHz

Cardiac electric Input loop current: 0.1 μA


Measuring range:

a) SBP: (8.034.0) kPa or (60255) mmHg

b) DBP: (4.026.0) kPa or (30195) mmHg

c) MAP: (5.328.7) kPa or (40215) mmHg

Automatic measuring interval: 3 min-99 min adjustable continuously within range

interval error: ±10 s

l  RR

Measuring range: 0 BPM-100 BPM


Channels: 1

TEMP probe: surface probe 1pcs

Measuring range: 28-45

Response time: 30s

l  SpO2

Measuring range: 0-99%

l  PR

Measuring range: 30-250 BPM


Working Temperature: +5 -40   Humidity: 80%  Atmospheric pressure: 86 kPa106 kPa



The product approved by CE, Free sale certification. If you need copy of the files, please contact our sales.



l  Single Unit  Suitcase Package Dimension: 55cm x 26cm x 36cm     Gross weight: 10.5kg


l  Single Unit  Paper carton Package Dimension: 55cm x 26cm x 36cm   Gross weight: 8kg


l  Normal collocation: 2 x US probe, 1 pcs TOCO probe, 1 pcs RS-232 serial port line, 1 pcs probe bandage, 1 pcs SpO2  probe, 1 pcs TEMP probe, 1 pcs electrode probe, 1 pcs power cable, 1 pcs power switch, 1 pcs BP cuff, event marker, 2 pcs printing paper, 250ml gel, , warranty card, operation manual, service manual.




Contact us:
Nanshan District, Shenzhen, South Road South Oil Industry Zone 210, 4th floor
0755- 26416184/ 86578562
Follow usFollow us:

WeChat Public

Mobile official website

Copyright ©2017 Shenzhen Beisiman Precision Instrument Co., Ltd.
Rhino Cloud provides enterprise cloud services